Pontoon Boat Construction
  • Innovations that Elevate your ride.

Our designers' compulsive dedication to engineering and heritage has developed some of the best-built pontoon boat platforms in the industry. Harris pontoons feature patented TTRS (Total Torsional Reduction System) deck construction. Each boat is designed to be a true "integrated system" that creates a strong, lightweight pontoon platform proven to endure years of rigorous use.

Advanced Pontoon Construction

> Advanced Pontoon Construction

Dolphin Nose Cone Design

  • Exclusive 2-piece Dolphin Nose Cone with integrated splash fin is both elegant & engineered to perform *
  • Dolphin Nose Cone design navigates through water with grace & ease
  • Integrated Splash Fin features:
    • attractive rolled edges provide safer conditions
    • higher mounting to be more dock- and trailer-friendly

* Select models feature a modified nose cone

Pontoon Tubes

  • Sealed pontoons are a full 25"* diameter to provide maximum stability
  • Tube sections are crimped to fit over each other, then welded with a strong, double-layered seam for ultimate strength
  • Multiple air-tight pontoon chambers ensure that a pontoon can safely return to the dock if a pontoon gets damaged or takes on water

* Standard feature on select models

Patented Brackets & Bracing
  • Harris Deck Section
  • Typical Deck Section

> Total Torsion Reduction System

  • Full-length M-Brackets* span the length of each tube
    • Unparalleled contact area provides continuous rigidity for floor support
    • Spans the entire length of the deck to avoid twisting & flexing between mounting areas
    • Precise fastening channels secure the deck

* Standard feature on select models

Brackets and Bracing
Watertight Deck Construction

> Watertight Deck Construction

  • Incredibly rigid, secure and watertight deck design
  • 4" to 24" spaced transitioning crossmember structure made of high-quality C- and Z-shaped aluminum extrusions
    • closer spacing towards the rear of the boat at its power source
    • further spacing towards the front to lighten while maintaining maximum rigidity

4-Step Under Deck Water Prevention System

  1. Butyl rubber tape is applied between crossmember & deck
  2. Urethane sealant applied between the seams
  3. Tongue-and-groove, 7-ply marine-grade pressure-treated deck
  4. Urethane sealant applied to all top seams and top of screw heads
  • Custom Tek screws hold deck tight with a friction weld
  • Over 100 screws are used on every deck to ensure a strong, watertight bond
Rubrail Protection

> Rubrail Deck Protection

  • 3" deep aluminum rubrail provides superior deck protection
  • Absorbs unintended impacts without damaging the greater deck structure
  • Easily replaced when damaged
  • Wrap-around corner system eliminates the need for end caps while providing a much stronger corner

> Marine-Grade Wiring

  • Wiring is protected from abrasions and designed to withstand a marine environment. Plastic grommets and conduit protect wiring from contact with aluminum.
  • Deutsch® connectors provide a water-resistant and secure connection.